Trains
Equipment

• Dilution Controller – A wall mounted unit which is connected to mains water. Detergent is mixed with water at a pre-set dilution rate and provides a “ready to use” mixture of diluted detergent.
• Foam Generator – A wall mounted unit which is connected to a compressed air supply and pressure washer facility. Water, air and detergent, are blended at a pre-set dilution to create foam which is applied via a separate lance and hose.
• Automatic Foam Arch - This equipment will normally be situated in front of a wash plant. A magic eye is activated by train movement which initiates foam arch operation. A pre-set dilution of detergent in foam form is sprayed on to train from multi-angled jets incorporated in the arch. The train is driven slowly to ensure an accurate coating of detergent is applied.
• Water Fed Brush System - Ideal for deep cleans and spot cleaning of areas which are missed by a wash plant. This is a wall mounted unit which is connected to a pressure washer facility and provides a pre-set dilution of detergent through a brush head.
• Electric Booster Pump - For use when a dilution controller is installed on to a hot water supply. This pump will ensure adequate water pressure is achieved in order to deliver an accurate dilution of detergent.
• Under Frame Foam Bar - Ideally situated in a channel preceding a pit this will ensure an even coating of foamed detergent is applied to the underside of the train by simply driving over the upward spray at a walking pace.