PREMIUM CAR CARE PRODUCTS
designed and manufactured in the UK

Chemist-Engineered Cleaning
made for car care enthusiasts

Pay in 3 Instalments
Klarna available

Polar Foam Sprayer

SKU
PFSPRAYERAU

Create a blanket of snow foam without a pressure washer with our Polar Foam Sprayer – the perfect partner to our Polar series products.

Polar Foam Sprayer

In stock
SKU
PFSPRAYERAU
GBP 0.00

Create a blanket of snow foam without a pressure washer with our Polar Foam Sprayer – the perfect partner to our Polar series products.

AVAILABLE AT

Overview
How To Use
Customer Also Viewed

Big Foam. No pressure washer needed.

The Polar Foam Sprayer is the easy, effective way to deliver a thick, luxurious snow foam wash, and no pressure washer required. Whether you’re loosening stubborn dirt with Polar Blast, deep cleaning with Polar Wash, or sealing the surface with Polar Seal, the Polar Foam Sprayer is designed to deliver a satisfying, swirl-free wash every time.

BUILT TO LAST

Made from high-grade materials to resist wear and chemical contact, the Polar Foam Sprayer is built for repeated use.

SIMPLE TO USE

Just add your Polar Series product, fill with water, pump to pressurise, and spray. When you’re done, a quick pull on the safety valve safely releases pressure.

GREAT FOAM WITHOUT A PRESSURE WASHER

Equipped with the Polar Foam Sprayer you can create a foam consistency to gently loosen dirt with Polar Blast, efficiently deep clean with Polar Wash and produce a hyper-hydrophobic finish with Polar Seal.

  1. Always wear safety glasses when using the sprayer. With the lid screwed on, pull the safety valve to ensure the device is depressurised.
  2. Remove the lid and refer to the dilution ratio for your chosen product. Fill the bottle to a maximum level of 1.25 litres, screw the lid back on and pressurise using a pumping action until you feel resistance. Always follow the health and safety advice listed on the product label.
  3. Press the handle to commence spraying and use the pump when required to offset any pressure loss. You can lock the trigger action by pressing the black button.
  4. Unused product should NOT be left inside the bottle after use. The sprayer and bottle should both always be flushed with clean water and then depressurised before storage. 

Q: What is the Polar Foam Sprayer?

A: The Autoglym Polar Foam Sprayer is a high-quality, hand pressure, foaming sprayer. It allows the application of our Polar Series without the need for a pressure washer, electricity supply & hose pipe.

Q: What products can the Polar Foam Sprayer be used with?

A: The Polar Foam Sprayer has been designed to be used with the Autoglym Polar Series of chemicals. It has undergone extensive testing to ensure optimal compatibility.

Q: How is the Polar Foam Sprayer different to other sprayers?

A: The Polar Foam Sprayer has been engineered to produce thick, clingy foaming agents for car cleaning. With its large capacity, tough materials and safety valve, long term car cleaning is assured.

Q: Can I use other products in the Polar Foam Sprayer?

A: The Polar Foam Sprayer is specially built for the foaming Polar Series. We cannot guarantee results with other chemicals. For other Autoglym products like Advanced All Wheel Cleaner, Magma, Caravan & Motorhome Cleaner & Rapid Aqua Wax, we recommend the Autoglym Easy Sprayer.

Q: What is the capacity of the Polar Foam Sprayer?

A: The Polar Foam Sprayer has a usable capacity of 1.25L which allows for air pressure to be built up correctly before use.

Q: How many pumps are needed before use?

A: With 1.25L of product in the bottle, around 15 pumps is required to pressurise the sprayer before use. During use, the pressure will decrease. Simply pump more to increase the pressure again.

Q: Can I clean a whole car with 1 bottle of product?

A: Yes, 1.25L of mixed product should be enough to complete one average sized car. Of course if you have a large SUV or over spray an area, the actual use rate will vary.

Q: What should I do if the sprayer nozzle is not working?

A: In the event of obstruction of the nozzle, clean it with water and do not use metal objects.

Q: How do I maintain the Polar Foam Sprayer?

A: It is very important to use the safety valve to depressurise the sprayer after use, and the sprayer should always be flushed & cleaned before being stored.

Q: Can I leave product in the reservoir bottle after use?

A: We don't recommend that any product is stored in the Polar Foam Sprayer. The bottle of diluted product should be used in 1 application.

Q: Do I need to clean the sprayer when switching chemicals?

A: Yes, it is important to flush through and rinse the sprayer components when switching from say Polar Blast to Polar Wash for best performance.

Q: What's best, the Polar Blaster or the Polar Foam Sprayer?

A: Each application method has been designed for different users. The Polar Blaster is designed for those with access to a pressure washer that gives maximum foam and speed of use. The Polar Foam Sprayer has been designed for users without a pressure washer but still want to be able to use the Polar Range of products.