PREMIUM CAR CARE PRODUCTS
designed and manufactured in the UK

Next Day Standard UK Delivery
when ordered before 12pm

Pay in 3 Instalments
Klarna available

Polar Collection

Everything you need to pre-wash, wash and protect your car with the power and ease of thick, grime-attacking foam, all in handy 500ml trial sizes.

Polar Collection

£32.50

Everything you need to pre-wash, wash and protect your car with the power and ease of thick, grime-attacking foam, all in handy 500ml trial sizes.

Learn more

Free Next Day Delivery* for Orders Over £19.99 *Excludes marked products and Non-UK Mainland

Currently in stock
Overview
How To Use
Review
Community
Customer Also Viewed

Standout shine

Three products, three thicknesses of foam, three very unique roles in making your car showroom-ready. And because they’re specially formulated for use with the Polar Blaster and your pressure washer, covering your car with a blanket of foam is fast, effective and incredibly long lasting on the shine front.

Polar Blast

A pre-wash extraordinaire. Our Polar Blast effortlessly delivers a touch-free, high-cling foam experience that elevates your car washing experience, and paintwork finish, in just three minutes.

Polar Wash

Easy to spray on and gentle on your car’s curves, our Polar Wash high foaming shampoo is designed for minimal agitating effort, yet extremely effective car washing session.

Polar Seal

Our Polar Seal is the show-stopper of our Polar range, delivering a super protective, hydrophobic coating for a quick and easy high-gloss finish that stands the test of time.

Polar Blast
  1. Before you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight.
  2. Polar Blast can be used at various dilutions depending on the density of foam desired. A good starting point is 100ml product to 500ml water in your foaming bottle. Adjust foam gun settings as required to increase or reduce foam.
  3. Spray Polar Blast onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.
  4. Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, although do not allow it to dry on.
  5. Finally, rinse thoroughly from the bottom up.  


Polar Wash
  1. Before you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight.
  2. We recommend a pre-wash with Polar Blast to gently loosen dirt. If not, rinse first with water to loosen heavy contamination.
  3. Polar Wash can be used at various dilutions depending on the density of foam desired. However, we would not recommend using a dilution stronger than 50:50. Adjust foam gun settings as required to increase or reduce foam. 250ml of mixed solution should be enough to cover an average sized car.  
  4. Spray Polar Wash onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.
  5. The cleaner will begin to loosen dirt on all surfaces. For the most thorough clean we recommend agitating the foam with a sponge or wash mitt.
  6. Rinse thoroughly from the bottom up and dry.

Polar Wash is not suitable for use on soft top convertibles.

Top Tip – Follow with Polar Seal for a protective, hydrophobic coating



Polar Seal
  1. Before you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight.
  2. We recommend starting with a snow foam like Polar Blast to gently loosen dirt, and follow with Polar Wash to remove any dirt or contamination on your paintwork.
  3. Only a small amount of Polar Seal is required. Pour no more than 40ml (four capfuls) into your foam bottle and then add at least 200ml of water. This should be all the finished solution required to cover your vehicle. There is no benefit in using any more than 40ml as over application can compromise the finish.
  4. Spray Polar Seal onto the clean, wet vehicle, ensuring all exterior surfaces are covered, although avoid direct application to the windscreen.
  5. Thoroughly rinse and dry your car to reveal a high-gloss finish that is protected with a hydrophobic coating. The car must be dried with a cloth and not allowed to air dry as water spotting may occur.
  6. Use Autoglym Fast Glass to clean the windscreen and wiper blades to ensure no smearing occurs.

We do not recommend applying more than once a month.

Polar Seal is not suitable for use on soft top convertibles.

Do not store diluted product. Please rinse foam bottle and pressure washer lance after use.

Top Tip – For the optimum finish, dry with the Autoglym InstaDry cloth.

Customer Questions
No Questions
Community

Share your photos on Instagram and tag #autoglym for a chance to be featured.